Radon Testing in Maryland Heights, MO

Radon testing in Maryland Heights, MO measures how much radon gas has built up inside a home, reported in picocuries per liter (pCi/L) against the EPA action level of 4.0 pCi/L. Air Sense Environmental places a calibrated continuous radon monitor in Maryland Heights homes for a 48-hour closed-house test and delivers a documented report, so buyers, sellers and homeowners in St. Louis County know whether the house sits above the action level. The first step for any Maryland Heights home is a measured radon number. No neighbor’s result, map or builder assurance replaces a test at the address itself.

Is radon a problem in Maryland Heights, MO?

Yes. St. Louis County is in EPA Radon Zone 2, where the predicted average indoor radon level is 2 to 4 pCi/L, and individual Maryland Heights homes routinely test well above the 4.0 pCi/L action level. Missouri’s Department of Health and Senior Services reports that roughly one in three homes tested through its statewide program between 2003 and 2023 came back at or above 4.0 pCi/L. Maryland Heights stretches from the upland neighborhoods off Dorsett Road down to the Missouri River bottoms around Creve Coeur Lake, so soil and foundation types change from one side of the city to the other.

A Maryland Heights neighbor’s reading is a signal, not an answer. The soil under one lot, the cracks in one slab and the way one sump pit was sealed decide the number, which is why two similar homes a few doors apart can land on opposite sides of the action level.

Which Maryland Heights homes should be tested for radon?

Any Maryland Heights home can have a radon problem, which is why the EPA recommends testing every home, retesting after renovations and retesting every two years once a mitigation system is running. In Maryland Heights, MO these are the homes that get tested most:

• 1960s to 1980s ranch and split-level homes off Dorsett Road and McKelvey Road
• Newer subdivisions on poured basements on the west side
• Homes near the Creve Coeur Lake bottoms with crawl spaces or slab foundations
• Condominiums and villas where the ground-floor unit is the one that needs testing
• Any home being bought or sold, where a radon test during the inspection period protects both sides of the deal

How does a radon test work in a Maryland Heights home?

1. Monitor placement. A calibrated continuous radon monitor goes on the lowest level of the home that is or could be lived in, away from drafts, windows and exterior doors, following EPA and NRPP placement protocol. For most Maryland Heights homes the monitor sits in the basement; for slab-on-grade homes it goes in a ground-floor room that is used daily.
2. 48 hours of closed-house conditions. Windows stay closed and the HVAC runs normally while the monitor records hourly readings, with tamper detection so the result stands up in a real estate transaction.
3. A documented report. You receive the hourly data and the average reading against the 4.0 pCi/L action level, with a plain explanation of what the number means for your Maryland Heights home.

How much does radon testing cost in Maryland Heights, MO?

What a radon test costs in Maryland Heights comes down to the test type and whether a closing date is involved. The current figures are kept on one page, the St. Louis radon testing cost guide, and the radon testing page compares professional monitors with DIY kits. For a Maryland Heights quote, call 314-664-9807.

What happens if a Maryland Heights radon test comes back at or above 4.0 pCi/L?

A result at or above 4.0 pCi/L means the EPA recommends mitigation, and in Maryland Heights the testing team is also the installation team. Radon mitigation in Maryland Heights, MO explains how the system is matched to local foundations; the St. Louis radon mitigation services page covers the process, documented results and warranty; and a post-mitigation test proves the fix worked.

Radon testing near Maryland Heights: neighborhoods and nearby communities

Air Sense Environmental tests homes across Maryland Heights, MO, including Creve Coeur Lake, the Dorsett Road corridor and the neighborhoods off McKelvey Road, in ZIP codes 63043 and 63146. Nearby communities with their own service pages:

• Radon testing and mitigation in Chesterfield, MO
• Radon testing and mitigation in Creve Coeur, MO
• Radon testing and mitigation in St. Charles, MO
• Radon testing and mitigation in Florissant, MO
• All Air Sense Environmental service areas

Related from Air Sense Environmental: Indoor Air Quality Testing and Reviews & Projects.

From Our Work